manualshive.com logo in svg

LIFAN Power USA 2V77F, Руководство пользователя

Поделиться
Скачать
LIFAN Power USA 2V77F Скачать руководство пользователя страница 6

 

 

5 

SAFETY PRECAUTIONS 

WARNING: 

Before  operating  the  engine,  be  sure  to  read  and  familiar  with  the  manual  carefully,  otherwise  personal 

injury or equipment damage may occur. 

Please pay special attention to the following: 
1. Running the engine in a well-ventilated place, keep it at least one meter away from building walls or other   
equipments, keep away from inflammables such as gasoline, matches and so on to avoid possibility of fire. 
2. This engine should not be used underground. 
3. This engine should not be used in areas where explosive conditions are present. 
4. Keep the engine out of reach of children and pets to avoid accidents. 
5. Operator of the engine has been specially trained. 
6. Refuel in a well-ventilated area with the engine stopped, and in places refueling or storing gasoline, no smoking and   
any flames or sparks. 
7. Refuel the fuel tank not too full so as to avoid fuel’s spilling out. If there is spilled fuel around, be sure to clean it   
thoroughly before starting. 
8. Locate the engine on a level-working platform to avoid fuel’s spilling out. 
9. Maker sure the fuel filler cap is tightened securely. 
10. The exhaust muffler is very hot during running the engine even after the engine stops. Never touch it, or you may   
get burns. Transport or store the engine with it cooling down entirely. 
11. This machine should not be used underground or in areas where explosive conditions may be present. 
12. It’s recommended that the operator wears the ear protection equipment during operation. 

Содержание 2V77F













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды