In the main interface touch and to switch to
Humidity interface.
It displays the relative humidity at which the purifier main
unit is located.
9
In the main interface touch and to switch to
TVOC interface.
According to national standards, AQI (air quality index)
measurement doesn’t account for TVOC. Thus, when the
monitoring controller displays good , it doesn’t indicate TVOC
is under national standard level. It takes about 40 seconds for
the value to stabilize.
TVOC measurement
Good:
570$
CN
CN
Temperature measurement
TEMP
Moderate:
Unhealthy:
Very unhealthy:
Hazardous:
Note: The monitoring controller uses a semiconductor sensor to measure TVOC, it cannot replace professional instruments.
In the main interface touch and to switch to
Temperature interface.
It displays the temperature at which the purifier main unit is
located.
Note: To enable this function, please ensure the monitoring
controller is connected with LIFAair purifier main unit.
TVOC is divided into five levels:
Monitoring Controller Testing Items
Humidity measurement
HUM
CN
Note: To enable this function, please ensure the monitoring
controller is connected with LIFAair purifier main unit.
"
SMART
"
SMART
"
SMART
CO
2
measurement
In the main interface press and to switch to
CO
2
interface.
CO
2
concentration will display on the monitoring controller,
≤
1000ppm is good.
When the concentration is over the standard level, it is
recommended to open window for ventilation.
It takes about 40 seconds for the value to stabilize.
The average CO
2
concentration in outdoor air is about 400ppm.
CN
$0
2
"
SMART
English
10
Short Time and Continuous Monitoring of Monitoring Controller
1.
5FTU
CN
How to Operate Monitoring Controller
1. Control the main unit: Touch to enter into speed mode selection interface (paired with the
main unit), touch to move selection box and click to select different purification mode.
The monitoring controller is the core of intelligent control; it should as
far as possible online pair with the main unit.
"
SMART
English
Press and hold , the controller will continuously monitor
air quality and will display for 5 minutes. The Test icon will
blink on the secondary display. Press to exit this mode
at any time during this process.
Note: After pairing with the unit (main unit indicator light is white), the controller will regularly monitor air quality and auto-control the operation of
the main unit, despite of what aforementioned mode is selected.
Purifier Off: Power on/off fresh air purifier.
Smart Mode: According to real-time indoor air quality, the
monitor will auto-adjust the main unit’s fan
speed (recommended mode).
Manual Mode: Manually adjust the fan speed of the main unit;
the fan speed will be held at set value.
Night Mode: Fan will run at ultra-low noise level, to ensure
a comfortable sleeping environment. Fan
speed will remain at constant speed.
Turbo Mode: Maximum fan speed, rapid purification.
Anti Allergy: The main unit will continue to run at a specified
fan speed and will not be affected by PM2.5
concentration during this period. It is
recommended to enable this function during
flu or pollen season.
Purifier Off
Manual
Smart
Night
Night
Manual
Anti allergy
Turbo