Monitoring controller
3
①
②
③
④
⑤
⑦
⑧
1.
⑥
CODE:XXXXXX
S/N:XXXXXXXXXXXX
4
Function Description
Initial Installation
CN
①
Main display screen
②
Secondary display screen
③
Touch button
Setting: press and hold: enter into setting interface
press: return to previous menu
Test: press and hold to check air quality for 5 minutes
Confirm: click to confirm
Filter: click to enter into filter use and filter reset interface
Main unit speed control: click to select purifier's fan
speed mode
(Note 1)
④
Turn ON/OFF / Black screen/light up screen
Turn ON/OFF: press and hold
Black screen/light up screen: press
⑤
5V DC microUSB power connector
⑥
PM2.5 sensor air inlet
(Note 2)
⑦
PM2.5 sensor air outlet
(Note 2)
⑧
Model identifications
S/N code: serial number of monitoring controller
(required for warranty)
CODE code: password of APP remote control.
Not case-sensitive.
To move selection box or alter the value
Note 1: It is only enabled when connected with LIFAair smart air purifier.
Note 2: To avoid effecting sensor accuracy, avoid blocking the intake and exhaust area. Using plush fabric cushioning may clog exhaust.
"
SMART
2
Remove the bottom cover.
Hold the top of HEPA filter by hand and take out the filter.
4
Put HEPA filter into the carbon barrel.
1
3
6
5
Cover the ground with a soft towel or a protective pad, flip the main unit
upside down and rotate the bottom cover to unlock position. Make sure the
DC power is cut off.
Open the protective bag to take out the carbon barrel (repeat the same
actions to take out filter and carbon barrel at the bottom).
Remove the protective bag of the carbon barrel.
English
English