26/79 Gebruikershandleiding / User Manual / Bedienungsanleitung
HAL200Li,
rev. 1.0: 09-02-20223
▪
Prolonged operation of Hal200Li finishing screed may damage your health. Never operate the
Hal200Li finishing screed for longer than an hour at a time. When operating frequently, it is
obligated to wear vibration reducing gloves.
Power tool use and care
▪
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was designed.
▪
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
▪
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
▪
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
▪
Maintain power tools and accessories. Check for misalignment of binding or moving parts,
breakage of parts and any other condition that may affect the power too
l’s operation.
If damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
▪
Use the power tool, accessories and toot bits etc. In accordance with these instructions, taking
Into account the working conditions and the work to be performed. Use of the power too! for
operations different from those intended could result in a hazardous situation.
▪
Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not a!!ow for safe handling and control of the
tool in unexpected situations.
▪
Regular maintenance improves safe operation of the Hal200Li finishing screed.
▪
Protect sufficiently against moisture.
▪
Check if the ventilation openings in the motor housing are not blocked.
▪
Check the leads on the battery pack and drive unit regularly.
▪
Check the fasteners of the machine regularly. When the Hal200Li finishing screed is in
operation, the fasteners can loosen due to the vibrations.
▪
Place a switched off Hal200Li finishing screed on a solid and stable surface.
▪
Always place the drive unit in a dry area.
▪
When the Hal200Li finishing screed is not being used for longer a period of time, then it must be
stored in a dry and clean area.
▪
When cleaning the Hal200Li finishing screed, ensure that no water or cleaning detergent gets
into the motor housing.
Service
▪
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power too! is maintained.
4.3 General safety instructions for battery packs.
Thoroughly read all safety instructions.
Failure to observe the safety instructions and instructions can result in electric shock, fire and / or serious
personal injury.
