Liebert Liebert PSI 1000, Руководство пользователя

Страница: 14 / 28

Installation
10
3.6 Connect Network Surge protection
Connect a 10 base-T/100 network cable to the RJ-45 network surge protection IN jack on the rear of
the UPS. Connect from the OUT jack with network cabling to network equipment (see Figure 10 ).
Figure 10 Connect network surge protection
3.7 Connect Communication Interface
Determine what type of communication connection to use to manage the UPS. The Liebert PSI can be
monitored with any of these communication methods:
• Contact closure
• USB
• SNMP (requires optional IS-WEBRT3 card)
See 3.8 - Set Up Liebert MultiLink software for details and installation information. Also refer to
6.4 - UPS Communications .
Figure 11 Connect communication interface
EPO
VOLTAGE=220V
VOLTAGE=230V
VOLTAGE=240V
2 1 FUNCTION
Network Surge
Protection IN Jack
Network Surge
Protection OUT Jack
Network
Equipment
EPO
VOL
TAGE=220V VOL
TAGE=230V VOL
TAGE=240V
21
FUNCTION