Liebert PSA itON
Installation and User Manual
6. Technical Data
600VA
1000VA
CAPACITY
V/AW
600VA/360W
1000VA/600W
Voltage Range
140-300 VAC
160-300 V
Frequency
45-65 Hz (Auto Sensing)
45-65 Hz (Auto Sensing)
Voltage Range
230V
230V
Voltage Regulation
(Batt Mode)
+/-10%
+/-5%
Frequency
50Hz or 60Hz
50Hz or 60Hz
Frequency Regulation
(Batt Mode)
+/-1Hz
+/- 1 Hz
Output Waveform
Stepped Waveform
Stepped Waveform
Overload
110% for 5 minutes as 'Mains'
mode
110% for 5 minutes as 'Mains'
mode
Battery Type &
Number
12V/7AH - 1Pc
12V/7AH - 2 Pcs
Backup time (*As per
the loads)
15-22* mins
30 min typical* (with 1 PC)
Recharge Time
8 hours to 90% after complete
discharge
8 hours to 90% after complete
discharge
TRANSFER TIME Typical
4-8 ms
4-8 ms
AC Mode
Green Lights up
Green Lights Up
The 1st green lighting up, the
2nd to 5th green lighting up
indicates load capacity
Backup Mode
Green Flashes
Green Flashes
The 1st green flashing, the 2nd
to 5th green gradually lighting
indicates batteries capability
Fault
Red Lighting up
Backup Mode
Sounds every 10 seconds
Sounds every 10 seconds
Low Battery
Sounds every second
Sounds every second
Overload
Sounds every 0.5 seconds
Sounds every 0.5 seconds
Battery Replacement
Sounds every 2 seconds
Sounds every 2 seconds
Fault
Continuously Sounding
Continuously Sounding
PROTECTION
Full Protection
Discharge, overcharge and
overload protection
Discharge, overcharge and
overload protection
Dimension (m,m)
DxWxH
330 x 100 x 140
369x141x181
Net Weight
6 kg
13.5 kg
Operating Environment 0-40 C 0-90% relative humidity
(non condensing)
0-40 C 0-90% relative humidity
(non condensing)
Noise Level
Less than 40 db
Less than 40 db
INTERFACE
RS 232
Support Windows
95/98/NT/2000/XP and Linux
Support Windows
95/98/NT/2000/XP and Linux
*For additional information on backup please contact your local Emerson Network Power representative
PHYSICAL
ENVIRONMENT
Liebert PSA itON
AUDIBLE ALARM
BATTERY
INDICATOR
INPUT
OUTPUT
Page
１２
V2.8
Emerson Network Power
PS600-TN
PS1000-TN
