background image

Limited Warranty          11

6.0

L

IMITED

 W

ARRANTY

This Warranty is given ONLY to purchasers who buy for commercial or industrial use in the ordi-

nary course of each purchaser's business.

General:

Liebert’s products are in our opinion the finest available. We take pride in our products and are 

pleased that you have chosen them. Under certain circumstances, we offer with our products the 

following Five-Year Warranty Against Defects in Material and Workmanship. Please read your 

Warranty carefully. This Warranty sets forth our responsibilities in the unlikely event of defect 

and tells you how to obtain performance under this Warranty.

Five Year Limited Warranty Against Defects In Material And Workmanship

Liebert products covered: Interceptor II and Interceptor Hybrid Advantage (SAD) Series TVSS.

Terms of Warranty:

As provided herein, the Liebert product is warranted to be free of defects in material and work-

manship for a period of five (5) years from the date of delivery of the product to User. The delivery 

date will be determined only from the Liebert bill of lading. If any of the Liebert products fail to 

conform to the warranty within the warranty period, Liebert, at its option, will furnish new or fac-

tory remanufactured parts for repair or replacement of that part.

Warranty Extends to First Purchaser for Use, Non-transferable:

This Warranty is extended to the first person, firm, association or corporation for whom the Lie-

bert product specified herein is originally installed for use in the United States (the "User"). This 

Warranty is not transferable or assignable without the prior written permission of Liebert. 

Assignment of Warranties:

Liebert assigns to User any warranties which are made by manufacturers and suppliers of compo-

nents of the Liebert product and which are assignable, but Liebert makes NO REPRESENTA-

TIONS as to the effectiveness or extent of such warranties, assumes NO RESPONSIBILITY for 

any matters which may be warranted by such manufacturers or suppliers and extends no cover-

age under this warranty to such components.

Descriptions:

Liebert warrants for the period and on the terms of the Warranty set forth herein that the Liebert 

product will conform to the descriptions contained in Liebert' final invoices, orders and Liebert' 

product brochures. Liebert does not control the installation and use of any Liebert product. 

Accordingly, it is understood that the Descriptions are NOT WARRANTIES OF PERFORMANCE 

and NOT WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE.

Obtaining Performance Under This Warranty:

Within a reasonable time, but in no case to exceed thirty (30) days, after User's discovery of a 

defect, User shall contact Liebert and request a return authorization number. User shall ship the 

product, with proof of purchase, to Liebert freight prepaid. Liebert products shipped to Liebert 

without a return authorization number will be refused and returned freight collect to User at 

User's expense. Liebert products shipped by User to Liebert which have incurred freight damage 

due to User's improper packaging of the product will not be covered by this Warranty and any 

repairs or replacement parts, components or products needed will be invoiced in the full current 

price amount and returned freight collect to User.
Subject to the limitations specified herein, Liebert will repair or replace, at its option, without 

charge for Liebert labor or materials, subsequent to its inspection and F.O.B. Liebert' facility, the 

Liebert product shipped to Liebert with a return authorization number and warranted hereunder 

which does not conform to the Warranty. Replacement parts, components or products shipped to 

User prior to Liebert' receipt and inspection of the product claimed to be defective, shall be 

invoiced in the full current price amount and shipped freight collect F.O.B. Liebert' facility. War-

ranty coverage will be extended only after Liebert' receipt of the claimed defective product within 

thirty (30) days of shipment of any replacement parts, components or products, if applicable, Lie-

bert' inspection discloses the claimed defect and the returned product shows no signs of treatment 

or use which would void the coverage of this Warranty. 

Содержание II


















Отзывы: