Liebert GHT MT+, Руководство пользователя

Страница: 11 / 23

9
3-5. UPS Setting
There are two parameters to set up the
UPS.
Parameter 1: It’s for program
alternatives. There are 8 programs to
set up. Refer to below table.
Parameter 2 is the setting option or
value for each program.

01: Output voltage setting
Interface Setting
Parameter 2: Output voltage setting
For 208/220/230/240 VAC models, you may choose the
following output voltage in parameter 2:
208: presents output voltage is 208Vac
220: presents output voltage is 220Vac
230: presents output voltage is 230Vac
240: presents output voltage is 240Vac
For 110/150/120/127 VAC models, you may choose the
following output voltage in parameter 2:
110: presents output voltage is 110Vac
115: presents output voltage is 115Vac
120: presents output voltage is 120Vac
127: presents output voltage is 127Vac

02: Frequency Converter enable/disable
Interface Setting
Parameter 2: Enable or disable converter mode. You may
choose the following two options:
CF ENA: converter mode enable
CF DIS: converter mode disable
Parameter 1
Parameter 2