3
9. The UPS output supply sockets may be electrically live whenever the input
power lead is plugged into the mains supply socket. Turning the UPS off
does not electrically isolate the internal parts. To isolate the UPS, turn the
UPS off then isolate it from the mains supply.
10. When installing the UPS or making input and output connections, comply
with relevant safety standards (e.g. IEC950, VDE0805, EN50091-1).
11. This equipment complies with the requirements of the EMC Directive
89/336/EEC and the published technical standards. Continued compliance
requires installation in accordance with these instructions and the use of
manufacturer approved accessories with output cables not exceeding 10
metres (30 ft.) in length. Use a shielded cable for the external
communications interface.
12. Operate UPS only from a properly earthed, 50 Hz or 60 Hz, 208-240 VAC
mains supply. Models are available for 100-127 VAC supply voltages.
13. Route power supply cords so they are not walked on or pinched.
14. Never block or insert any object into the ventilation holes or other openings.
Maintain a minimum clearance of 100 mm (4 inches) in front and rear of the
UPS for proper air flow and cooling.
15. Operate the UPS in an indoor environment only with an ambient temperature
range of 0° C to +40° C (32° F to +104° F). Install it in a clean environment,
free from moisture, flammable liquids, gasses, or corrosive substances.
16. Storing magnetic media on top of the UPS may result in data loss or
corruption.
17. Turn the UPS off and unplug the UPS before cleaning. Use only a soft cloth,
never liquid or aerosol cleaners.
18. This equipment can be operated by individuals without previous training.
