14
UPS INTELLIGENT COMMUNICATIONS
The PowerSure™ Interactive UPS has the capability to communicate intelligently
with stand alone computers, network workstations, network servers, or UNIX hosts
via the DB-9 female connector located on the rear of the UPS. By purchasing the
optional Liebert SiteNet® 2 software package (sold separately), intelligent
communications allows the following capabilities:
•
Quantitative
monitoring
of utility and UPS power
•
Quantitative
monitoring
of internal UPS parameters
•
Periodic tests of battery quality and replacement notification
•
Timed and delayed shutdown of the UPS
•
Logging of power disturbances and anomalies
Contact your local Liebert representative, dealer, or reseller for more information
about SiteNet® 2 software.
UPS INTELLISLOT™ COMMUNICATIONS
The PowerSure™ Interactive UPS contains an Intellislot™ communications port for
the optional internal communications, such as the Ethernet SNMP card. Optional
SiteNet® SNMP Manager software is available to allow communication through
several network management systems. Contact your local Liebert representative,
dealer, or reseller.
CAUTION:
TO MAINTAIN SAFETY (SELV) BARRIERS AND FOR
ELECTROMAGNETIC COMPATIBILITY, SIGNAL CABLES SHOULD BE
SEGREGATED AND SEPARATELY RUN FROM ALL OTHER POWER CABLES,
WHERE APPLICABLE.
MAINTENANCE
The PowerSure™ Interactive UPS requires very little maintenance. The batteries
are valve regulated, nonspillable, lead acid, and require that they be kept charged
to obtain their designed life. Whether ON or OFF, the UPS continuously charges
the batteries when connected to the utility supply.
When storing the UPS for any length of time, it is recommended to plug the UPS in
for at least 24 hours every four to six months to ensure full recharge of the
batteries.
The PowerSure™ Interactive UPS is designed to allow the user to safely replace
the batteries. Read the safety cautions before proceeding. Contact your local
Liebert representative, dealer, or reseller to obtain the appropriate replacement
battery kit.
