Lidén Weighing LUW2001/LBW, Руководство пользователя, Страница: 13 / 19

12
If X ≤ A, do not conduct check weight and selection.
不
If X
＜
(B – D), it lacks of weight, and the display flickers.
If (B – D) ≤ X ≤ (B – C), it is qualified and the display has normal display
If X
＞
(B – C), it is overweight and the display flickers.
Acquisition of target value
Press
『
Total
』
long until the display shows
【
TARGET
】
, and then
press
『
Print
』
to show current target value and flicker.
If F2.6 = 0, press
『
Print
』
, the instrument will take the weight on current
scale as the new target value and quit the setting interface.
If F2.6 = 1, the display shows
【 】
, to request manual change of
target value. After change, press
『
Print
』
to save setting data and quit setting
interface.
● Function of accumulation scale F2.1 = 4
Operation method
In normal weighing state, when the scale is in zero, add weight to the
scale and press 『 Total 』 on operation panel, if the display shows
【 】
progress bar, it indicates that the current display weight
is included accumulated value, and then it returns to normal weighing
state. If the display shows 【 】 for a second, and returns to the
normal weighing state, it indicates operation is invalid. Reason: 1.
Between two accumulation operations, the scale must have back-to-
zero process, otherwise, accumulation is refused. 2. Accumulation
operation is effective only when display weight≥F2.2 is set. 3. The
scale is in dynamic state.
Adjustment, clearing and printing of accumulated value
In normal weighing state, press 『 Total 』 on operation panel for more
than 2 seconds, the display will show 【 】 for a second, and
then the display shows current total accumulated value 【 】
and flickers. To clear accumulated value, press 『 Zero 』 , to make flicker
weight be 0. Press 『 Print 』 to print accumulated data. Press 『 Hold 』
to quit the interface.
Attention: set whether to be over detailed data or accumulated data in
F4.6.