2.
Do not place any metal objects near the weighing scale as the static
electrical charges can influence the reading.
3.
Please calibrate the scale before first use.
8.0
INSTALLATION INSTRUCTION
1.
Ensure the power supply are as per below specification;
a)
Range of signal input of the transducer: 0-20mV
b)
Power supply: (1) 6V/4.5AH
(2) 10~12VDC/500MA output
2.
Connecting the AC adapter
9.0
OPERATION INSTRUCTION:
9.1
: To perform counting function for unknown samples weight
a)
Turn on the power switch located at the right side of the scale. Allow the scale to
warm up for 1 min before placing any item for weighing.
b)
Before perform weighing, ensure the scale display ‘0’ reading. If scale display is not
‘0’, perform the following;
ZERO weigh
Press [ZERO] button to zero scale.
*Note: The ZERO key can only zero any weight which is ±3% of the maximum
capacity.
