LIC HVC-XXXX/QCW-USB, Инструкция по эксплуатации

Страница: 22 / 27

Page 22
Instruction Manual V1.3
3.2 STARTING IN CW/PULSE MODE
3.2.1 CW OPERATION
STEP 1. TURN AC CIRCUIT BREAKER ON AT BACK PANEL
STEP 2. PRESS POWER ON BUTTON IN FRONT PANEL
Confirm READY will come on in 10-30 seconds
.
STEP 3.
ADJUST LOAD CURRENT
Adjust Output Current on the control screen at the desired value. It shows
percentage to a full current value.
STEP 4.
TURN OUTPUT ON/OFF SW. ON
For QCW unit, the setting voltage is slightly changed after the load current is
flowed. Adjust the current, if necessary.
The output voltage indicator shows the actual voltage.
3.2.2 PUSE OPERATION USING INTERNAL PULSE GENERATOR
STEP 1.
TURN AC CIRCUIT BREAKER ON AT BACK PANEL
STEP 2. PRESS POWER ON BUTTON ON FRONT PANEL
Confirm READY will come on in 10-30 seconds.
STEP 3. PRESS PULSE BUTTON ON THE CONTROL SCREEN
The control screen moves to a Pulse Setting Screen.
STEP 4. SET DESIRED PULSE COMBINATION ON THE SCREEN
The detail of this screen and how to set the pulse combination are explained
in a separate manual. Refer to Pulse Setting Manual attached with the
product.
STEP 5.
ADJUST LOAD CURRENT
Adjust Output Current on the control screen at the desired value. It shows
percentage to a full current value.
STEP 6.
TURN OUTPUT ON/OFF SW. ON
For QCW unit, the setting voltage is slightly changed after the load current is
flowed. Adjust the current, if necessary.
The output voltage indicator shows the actual voltage.
3.2.3 PUSE OPERATION USING EXTERNAL TRIGGER
STEP 1. TURN AC CIRCUIT BREAKER ON AT BACK PANEL
STEP 2. PRESS POWER ON BUTTON ON FRONT PANEL
Confirm READY will come on in 10-30 seconds.