T260 Series Router User Manual
Shenzhen Libtor Technology Co.,Ltd
Page 8 of 43
Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian Street
Office, Longgang District, Shenzhen City, Guangdong Province.
Web:http:www.libtor.com Tel: 86-755-28345166-807 Fax:86-755-28345166-804
Mail:[email protected]
LAN1
、
LAN
2 light
Constant
light
Already connected RJ45 port
Power
off light
Disconnect RJ45 port
Power light
(power)
Constant
light
Power supply normal
Power
off
No power supply
WIFI light
Constant
light
Establish WIFi network successfully
Power
off light
Close WIFI network
USB light
Constant
light
It can be normal use when system detect storage aleady
Power
off light
System can’t detect storage
Reset button use method
SYS light (SYS) will be flashing quickly when long press RESET button for 5 seconds , the
system resets successfully when router restarting.
Serial port’s usage
T270 only open UART1 as standard RS232 serial port for external use . (The URAT
connector can’t be used for external use if T270 add GPS function.)
Power connector
T260S offer 2.1 mm standard circle hole and 5.08 selflocked connect line port poewr supply
way. The inner part of electrodes is positive pole and the outer part of electrodes is
negative pole .Power supply voltage ranged from 5to 35 voltage .We suggest using 12
voltage to supply power. The power suppy should be equal or larger than 10 W.
Antenna connector