CHARGING THE CUBE
Internal Battery
Connect the power adapter to the Power Port and allow the battery to fully charge. When the Cube is powered off, charging will take
approximately 4 hours. The battery will charge at a slower rate if the Cube is powered on. In addition to the Charging Indicator, the
Cube's battery level can be checked under Settings - Cube or System Health - Details in the application.
CHARGING INDICATOR:
On Battery Power
Green
>40%
Orange
<40%
Red
<20%
Red (flashing)
<10%
While Battery is Charging
(Power Port connected):
Green
100%
Orange
<100%
*You can operate the Cube while it is plugged into the power adapter once it has reached a minimum battery level of 10%.
BUTTON FUNCTIONS
C
AMERA MODE/RECORDING
STANDALONE
PAIRED
PRESS
Start/Stop local recording
PRESS
Start/Stop recording on a host device
HOLD
Toggle Video/Thermal/Fusion mode
HOLD
Toggle Video/Thermal/Fusion mode
IMAGE CAPTURE/SHARING
STANDALONE
PAIRED
PRESS
Capture Local Image
PRESS
Capture Image on Host Device
HOLD Toggle Video/Thermal/Fusion mode
HOLD
Capture and Share Image/Decline Call
ILLUMINATION/LASER
STANDALONE
PAIRED
PRESS
Toggle laser
PRESS
Toggle laser
HOLD
Toggle Illumination
HOLD
Toggle Illumination
TAP ANY BUTTON TO ACCEPT AN INCOMING CALL
UNPAIR FROM THE HOST: WITH THE CUBE TURNED ON, PRESS BOTH THE CAMERA MODE AND ILLUMINATION BUTTONS
FACTORY RESET: WITH THE CUBE TURNED OFF, HOLD DOWN BOTH THE CAMERA MODE AND ILLUMINATION BUTTONS THEN PRESS
THE POWER BUTTON. ALL SETTINGS AND FILES WILL BE DELETED.
Onsight Cube User Guide
