LibreStream n_sight MCD2000 User Manual
11
2.6.
Inserting and Removing an SD Memory Card
The MCD features an SD memory card slot to support configuration and
system upgrades and also to support future capabilities. To insert or
replace an SD memory card:
1.
Open the battery compartment with the stylus screwdriver, and
remove the battery.
2.
If there is already an SD memory card in place, flip open the access
door to release it from the slot.
3.
Pull the card out. It should slide out easily.
4.
Push the card gently in until it clicks into place.
5.
Close the access door. Re-insert the battery and close the
compartment door.
Note:
Do not remove the SD card while recording. This can corrupt the
card data.
Access door
