©Copyright 2016 Liberty Pumps Inc. All rights reserved 7
5
GR20 Quick Disconnect Assembly
GR20 Assembly
The GR20 quick disconnect assembly provided with your grinder package system is designed to allow easy installation
and removal of the pump. When installed correctly it will seal and provide a means to lift the pump without disconnecting
any of the discharge piping. Please ensure that installation is done as per the diagrams below.
DISCONNECTED POSITION PIPE GUIDE ASSEMBLY OPERATING POSITION
1-1/4"
GUIDE RAIL PIPE
1-1/4"
DISCHARGE
PIPE
INSTALL 3/8X16 HEX BOLTS
HERE. EVENLY TIGHTEN
BOTH SIDES SO THAT
GASKET IS PROPERLY
COMPRESSED.
ENSURE THAT RUBBER
GROMMET IS PROPERLY
INSTALLED HERE.
ENSURE THAT
GROMMET IS
PROPERLY
INSTALLED
