LIBERTY AV SOLUTIONS intelix INT-66HDX, Инструкция по установке и эксплуатации

Страница: 24 / 36

INT-66HDX
Installation Guide
24
System Query
The INT-66HDX can provide basic system information through the front panel LCD. To check the current source
going to an output, press and hold the output button for three seconds.
To query the matrix status:
1. Press and hold ENTER for 3 seconds.
2. Press input 3 or 4 (left or right arrow) to cycle through the options.
3. Press CLEAR to exit.
The following table describes each of the screens.
Function Example Description
Check the connection status of
inputs
In 01 02 03 04
Connect Y Y N N
Y means the corresponding port
is connected to an active input
device. N means there is no active
connection.
Check the connection status of
outputs
Out 01 02 03 04
Connect Y Y N N
Y means the corresponding port is
connected to an active display. N
means there is no active connection.
Check the output to input routes
Out 01 02 03 04
In 01 02 03 04
Shows the output to input routes.
Check the HDCP state of the inputs
In 01 02 03 04
HDCP Y Y N N
Y means the corresponding source
is encrypted with HDCP. N means
there is no HDCP encryption on the
source.
Check the HDCP state of the output
video content
Out 01 02 03 04
HDCP Y Y N N
Y means the output content is
encrypted with HDCP. N means the
content is not encrypted.
Check the resolution of the content
going to a display
Resolution
Out 1 1920x1080
Press the UP and DOWN arrows to
cycle through all outputs.