USER MANUAL / DL-PSMV62
9
Connect Displays
HDBaseT Cabling
HDMI Outputs
Connect display devices to the HDMI output using a High Speed HDMI cable that is less
than or equal to 1.5 meters in length for 4k60 signals and 5 meters for 1080p signals.
Connect a solid core CAT6 F/UTP rated category cable to the DL-PSMV62 HDBaseT
output and the DL-HD70-RX HDBaseT receiver (OPTIONAL). Use TIA/EIA-568B wiring
for Category 6 connection between the DL-PSMV62 and the receiver
Connect a display device to the HDMI output of the HDBaseT receiver using a High
Speed HDMI cable that is less than or equal to 1.5 meters in length for 4k60 signals and
5 meters for 1080p signals.
Note:
The HDBaseT transmitter supports up to 40m/132’ for 4K@30Hz / 4:4:4 / 8 bit
color signals (up to 10Gbps) and 70m/232’ for 1080p signals using CAT6 F/UTP cable
HDBaseT Output
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category 6
connection between send and receive
units.
To ensure proper performance of the DL-PSMV62, it is recommended that you use solid core,
shielded Category 6 F/UTP cabling at a minimum. Category 5e F/UTP may perform well but
may not support power over HDBaseT reliably over longer distances.
For optimized HDBaseT performance use the following Liberty Wire and Cable branded
cabling;
Category 6 plenum;
24-4P-P-L6SH
Category 6A plenum;
24-4P-P-L6ASH
Category 6 NON-plenum;
24-4P-L6SH
Category 6A NON -plenum;
24-4P-L6ASH
When using shielded category cabling
ALWAYS
...
....use shielded connectors
....properly ground the category cable
Содержание DL-PSMV62
Страница 4: ...USER MANUAL DL PSMV62 4 ...
