USER MANUAL / DL-PSMV62
27
1. Click the menu
Display Setting
.
2.
Enable or disable automatic control.
3.
Set the auto power off time that the display device will automatically power off
after no signal is detected and the setting time is up.
4. Set
Baud Rate
then click
Save.
5. The default command format is ASCII, tick
HEX
if needed.
6. Choose command terminator:
NULL, CR, LF or CR+LF
, then click
Save.
7. Type RS232 command to turn ON display device, then click
Save.
8. Set the delay time in seconds between the
“Display On”
and
“Display Input Select”
commands.
9.
Enter RS232 command to turn OFF display device, and then click
Save
. Select
x2
to send the command twice.
10. Set the delay time of sending the
Display Off
command again, and then click
Save
.
11. Type the RS232 command to select the desired input for the display device.
Auto Display Control
1
3
2
4
5
6
7
8
9
10
11
Содержание DL-PSMV62
Страница 4: ...USER MANUAL DL PSMV62 4 ...
