background image

-3-

1. Introduction

The aim of this manual is to introduce the user to Waspmote Plug & Sense! in a practical way. 

This document applies to the following Waspmote Plug & Sense! models, approved for FCC and IC:

Model 

FCC ID

IC

Waspmote Plug & Sense! 802.15.4

XKM-WPS-2400-V1

8472A-WPS2400V1

Waspmote Plug & Sense! 900 US

XKM-WPS-900-V1

8472A-WPS900V1

Waspmote Plug & Sense! WiFi

XKM-WPS-WIFI-V1

8472A-WPSWIFIV1

Waspmote Plug & Sense! 4G US

XKM-WPS-4G-V1

8472A-WPS4GV1

Waspmote Plug & Sense! LoRaWAN US

XKM-WPS-LORA-V1

8472A-WPSLORAV1

Waspmote Plug & Sense! Sigfox US

XKM-WPS-SFX-V1

8472A-WPSSFXV1

2. General and safety information

Software: 

 •

Upload code only using Waspmote IDE. If a different IDE is used, Waspmote can be damaged and can become 

unresponsive. This use is not covered under warranty. 

 •

Do not unplug any connector while uploading code. Waspmote can become unresponsive. This use is not covered under 

warranty. 

 •

Do not connect or disconnect any connector while Waspmote is ON. Waspmote can become unstable or unresponsive, 

and internal parts can be damaged. This fact is not covered under warranty. 

Hardware: 

 •

Do not handle black stickers seals on both sides of the enclosure (Warranty stickers). Their integrity is the proof that 

Waspmote Plug & Sense! has not been opened. If they have been handled, damaged or broken, the warranty is void. 

 •

Do not open Waspmote Plug & Sense! in any case. This will automatically make the warranty void. 

 •

Do not handle the four metallic screws of Waspmote Plug & Sense!. They ensure waterproof seal. 

 •

Do not submerge Waspmote Plug & Sense! in liquids. 

 •

Do not place nodes on places or equipment where it could be exposed to shocks and/or big vibrations. 

 •

Do not expose Waspmote Plug & Sense! to temperatures below -10ºC or above 50ºC. 

 •

Do not try to extract, screw, break or move Waspmote Plug & Sense! connectors far from necessary usage, waterproof 

sealing can be damaged and warranty will be voided. For more information: 

http://www.libelium.com

 

 •

Do not connect any sensor not provided by Libelium. 

 •

Do not place Waspmote Plug & Sense! where water can reach internal parts of sensors. 

Содержание Waspmote Plug & Sense! 4G US























Отзывы: