Libelium Waspmote LoRa Скачать руководство пользователя

Страница: 4 / 47

-4-

v7.0

LoRa and LoRaWAN

1. LoRa and LoRaWAN

This guide explains the LoRa features and functions. There are no great variations in this library for our new product lines

Waspmote v15 and Plug & Sense! v15, released on October 2016.

Anyway, if you are using previous versions of our products, please use the corresponding guides, available on our

Development

website

You can get more information about the generation change on the document “

New generation of Libelium product lines

”.

Libelium currently offers two options of this type of radio technology: LoRa and LoRaWAN

•

LoRa

contains only the link layer protocol and is perfect to be used in P2P communications between nodes. LoRa modules

are a little cheaper that the LoRaWAN ones.

•

LoRaWAN

includes the network layer too so it is possible to send the information to any Base Station already connected to

a Cloud platform. LoRaWAN modules may work in different frequencies by just connecting the right antenna to its socket.

These modules are based on the same modulation technology (the same PHY layer): LoRa™, developed by Semtech. The LoRa

module implements a simple link protocol, created by Libelium. However, the LoRaWAN module runs the LoRaWAN protocol, a

much richer and more advanced protocol, created by the LoRa Alliance.

The LoRa module and the LoRaWAN module are not compatible because the protocols are different.

This guide talks about the LoRa module, not about LoRaWAN. If you are interested in the LoRaWAN module, please read the

LoRaWAN Networking Guide:

http://www.libelium.com/development/waspmote/documentation/waspmote-lorawan-networking-guide/

Содержание Waspmote LoRa
















































Результаты поиска

Содержание Waspmote LoRa

Отзывы:

Похожие инструкции для Waspmote LoRa

Бренды по названию

Популярные бренды

Libelium Waspmote LoRa, Сетевое руководство

Результаты поиска

Содержание Waspmote LoRa

Отзывы:

Похожие инструкции для Waspmote LoRa

Бренды по названию

Популярные бренды