-6-
v7.0
Device description
2.3. Screen description
The LCD screen of the product is split on few parts:
•
The “Start” screen (it shows the firmware version) - Only on the powering up process
•
The “Join” screen - Only on the powering up and after a command mode exit
•
The “Uplink/downlink” screen (main screen)
•
The “GPS” screen
•
The “PER” screen (Packet Error Rate)
•
The “Downlink frame” screen
The following icons are present on each screen of the product:
Item
Icon
Description
GPS status
No icon
GPS has been deactivated
GPS has not been synchronized
GPS has been synchronized
Temperature
Temperature in °C
Battery
Battery level
Product in charge
2.3.1. Start screen
The device is switched on using the on/off switch located on the underside of the device. Once it has been switched
on, the device’s LCD screen will light up and the start menu will be displayed. This screen shows the 2 firmware
versions during few seconds.
Figure: Start screen