background image

-16-

v7.0

Working mode

3.4. General recommendations

Before starting the test, we advise to power up the device close to the base station, and having a computer with 

access to the Loriot back end, in case there is some configuration that hasn’t been done yet. Once the device 

shows data in the application, the test shall begin correctly. 

The device is prepared to work using th ADR (Adaptive Data Rate), so Libelium has configured it to start working with 

SF7 (spreading factor 7). This is the fastest wireless transmission mode, but bear in mind that it is the worst mode 

for getting long distances. If the packets do not reach the gateway during the test, the device will automatically 

change SF from SF7 to SF12. The higher is the spreading factor, the longer is the range. 

If the packets do no reach the gateway, the user will see that the device does not receive ACK frames. This will 

mean that the user has exceeded the limit of the coverage area. 

If the customer is interested in sending a high number of packets per day, attending always to the country 

regulations, it is recommended to find places where the device can send with lower spreading factors. The lower 

the spreading factor is, the faster the transmission of the packet is (as packets take less time on air, more packets 

can be send). 

It is also recommended to restart the Adeunis FTD at every location in order to check that the device joins properly 

to the network. 

Содержание Adeunis Field Test Device

















Отзывы: