Suspension from a frame (parasol, tent or similar item) by
means of a bracket
Ascertain that the frame from which you wish to suspend the
terrace heater is strong enough to take the weight of the
terrace heater for an extended period.
Choose which of the three supplied brackets is suitable for the
frame. Choose the smallest possible option for best fit.
Slide the bracket around the frame, place the terrace heater
against it and screw the bracket to the suspension bracket with
2 wing nuts (see picture).
Suspension from a ceiling by means of chains
Choose 2 suspension points in the ceiling, 40 cm apart.
Ascertain that the ceiling and fastening materials are strong
enough and suitable to take the weight of the heater for an
extended period.
Fasten the suspension eyes to the ceiling (not supplied).
Hook one end of the chains onto suspension points of the
heater by means of the karabiner hooks. Hook the chain at the
other end trhough the suspension eyes in the ceiling. Feeding
and fastening the chain with the second karabiner hook allows
you to raise the suspension height of the heater. You can also
wrap the chain around a horizontal beam or rod (see picture
on the right). Please always take account of the minimum
distances to the ceiling, floor, walls and objects and make sure
the heater is horizontal.
Please note:
Because the Liangdi HEAT AND BEAT heater has a high water-tightness (IP65) and for safety reasons, a
qualified electrician must handle or oversee the installation.
WORKING
Confirm before every use:
The heater doesn't show signs of damage.
The heater still is fastened firmly. Movement due to wind or rain can loosen the heater
There are no objects, canvas, sun screens etc. inside the safety distances.
If everything is all right you can insert the plug into the socket. The HEAT AND BEAT heater has a
remote control that works with two batteries: AAA, 1.5V. While using, point the remote control to the
receiving point of the heater. If there are obstacles between remote control and the heater, it will not
work. The commands from the remote control to the device can cover a maximum distance of 6
metres.
Warning
When you switch the heater off using only the remote control or app, it remains in Standby mode.
To completely swith the unit off, press the on/off switch on the heater and uinplug form the socket.
Remove the batteries when not using for extended periods like summertime or when you are away
on hiliday. It will extend the life of the remote control.
When you use the heater for the first time (or again after a long time), observe it during the first 10
to 15 minutes to be sure that it works trouble-free.
