LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 69 / 90

A-1 AirLink Cellular Communication
Appendix A.
Additional considerations
This section describes several operations that may simplify your use of the RV50X.
Selecting a data plan
Prior to selecting a data plan, it is wise to consider your data transfer needs and
what you wish to accomplish while accessing the instruments remotely. For
example, do you want daily or weekly status reports on the overall performance of
the system? Do you want to download raw eddy covariance data sets directly to your
computer?
The typical raw data volume when logging compressed .ghg eddy covariance files is
about 1 MB per half hour, or about 1.5 GB of raw data in 30 days. See
Table A-1
below for more details.
Sensors in System
Files to
Transfer Data
Volume
1
Any configuration given below Status
Reports <1 GB per
month
CO
2
/H
2
O Eddy Flux System: Includes Sonic Anemometer
and CO
2
/H
2
O gas analyzer.
Raw Data <2 GB per
month
CO
2
/H
2
O/CH
4
Eddy Flux System: Includes Sonic
Anemometer, LI-7700 and CO
2
/H
2
O gas analyzer.
Raw Data <2.5 GB per
month
Table A-1 . Suggested data volume for eddy covariance flux and soil CO
2
flux
systems.
1
Actual data volume will vary depending on the instrument configuration, the number of configuration
files sent to the instruments, and other factors. The values given here are assume 10 samples per second
logging of the default variable set in an LI-7500RS.