LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 60 / 90

Section 5. Connecting with remote instruments
Connecting to the LI-8100A system
If the RV50X is configured to support two-way communication you can change the
settings of the LI-8100A remotely.
1
On a computer that has Internet access, launch the LI-8100A configuration software and click the
Connect
button.
2
Select
TCP/IP
, enter the RV50X
IP Address
, and click
Connect
.
l
If the RV50X has a
Static IP
address, simply type it in (see Viewing the RV50X IP
address on page 4-4).
l
If the RV50X has a
Dynamic IP
address, retrieve the IP address from the DDNS
service provider (see Dynamic IP address on page A-5) and type it in.
After connecting to the instrument you can check the performance and modify the
configuration as you normally would.
LI-8100A data management and file transfer
The LI-8100A software has a built-in file manager that you can use to copy files to
your computer.
1 Connect with the LI-8100A as described in Connecting with remote instruments on page 5-1.
2
Launch the File Manager (
Utilities > File Manager
).
5-8 AirLink Cellular Communication