LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 53 / 90

Section 5.
Connecting with remote instruments
If the RV50X configuration and data plan both support two-way communication,
you can change the settings of each instrument in the system.
Connecting to the LI-7500A/RS/DS or LI-7200/RS system
This section describes how to connect with the LI-7500A/RS/DS or LI-7200/RS
from a computer with Internet access. You will find this useful if you want to
retrieve data, review the performance of the instruments, or alter the configuration.
1
On a computer that has Internet access, launch the gas analyzer PC software.
2 Connect with the instrument.
In the
Host (IPv4 Hostname):
field, enter the
IP address
of the RV50X. The
Port
will be
7200
for the LI-7500A/RS/DS or LI-7200/RS analyzers.
l
If the RV50X has a
Static IP
address, simply type it in (see Viewing the RV50X IP
address on page 4-4).
l
If the RV50X has a
Dynamic IP
address, retrieve the IP address from the DDNS
service provider and enter it (see Dynamic IP address on page A-5).
5-1 AirLink Cellular Communication