LI-COR AirLink RV50X, Инструкция по эксплуатации

Страница: 11 / 90

Section 1.
Introduction to the communication system
The cellular communication system enables wireless communication with LI-COR
eddy covariance systems and soil gas flux systems over cellular networks. The sys-
tem includes a Sierra Wireless AirLink RV50X cellular modem that supports 4G
LTE with fallback to HSPA+ protocols. The RV50X requires a service agreement
with a cellular provider.
Two models of RV50X are available to support global cellular networks. These are
made available from LI-COR as package 7900-715 and 7900-716 (see
Table 1-1
below). Both packages include all of the hardware required to use the cellular com-
munication system with LI-COR eddy covariance and soil gas flux systems.
Part Number Region
7900-715 North America, South America, Europe, Middle East, Africa (NA, SA,
EMEA)
7900-716 Asia Pacific (APAC)
Table 1-1 . LI-COR cellular communication packages and regions supported.
Arranging a data plan
Prior to using the RV50X you need to arrange a data plan with a wireless service
provider that offers cellular coverage at your site. The cellular service should be
3G/4G and be compatible with the frequencies and bands supported by the modem.
Obtain public fixed IP address. If you have access to a corporate or institutional cel-
lular account, you may need to arrange a payment plan within your institution. See
Selecting a data plan on page A-1.
Typically, the service provider will issue a SIM card (mini SIM, 2FF) that must be
installed in the modem see
Introduction to the communication system above). They
1-1 AirLink Cellular Communication