LGMG SR1623, Руководство по эксплуатации и обслуживанию

Страница: 59 / 86

Lifting Work Platform Operation and Maintenance Manual
52
At low temperature, -6
℃
and lower, idle the engine for 5 minutes before operation to make it be
lubricated fully and prevent hydraulic system from damages.
At extremely low temperatures, -18
℃
and lower temperature, the machine shall be equipped with a
low-temperature starter kit option. If the engine is started at the temperature lower than -18
℃
, it may
need to use booster battery.
9.5 Operation from Ground
1) Turn the key switch to the GCU.
2) The ground and platform red "emergency shutdown" buttons are pulled out to "On" position.
3) Start the engine.
Adjustment of Platform Position
4) Press and hold the enabling button with lifting functions.
5) Start the ascending or descending function.
The drive and turning function cannot be used through the GCU.
Idling Selection of Engine
Press the idling selection button to select the engine idling (rpm). Provide two idling settings of engine.
The indicator is off: low idling.
The indicator is on: high idling.
9.6 Operation from Platform
1) Turn the key switch to the PCU.
2) The ground and platform red "emergency shutdown" buttons are pulled out to "On" position.
3) Start the engine.
Adjustment of Platform Position
1) Press and hold the enabling button of lifting function.
2) Start the ascending/descending rocker switch in needed direction.
Steering
1) Press and hold the enabling switch on the control handle.
2) Turn the steering wheel by the thumb rocker switch on the top of control handle.
Drive
1) Press and hold the enabling switch on the control handle.
2) Acceleration: Move the control handle slowly to make it be away from the central position.
Deceleration: Move the control handle slowly to make it point to the central position.
Stop: Make the control handle return to the central position or release the function enabling switch.
Use the direction arrow on the PCU and platform to ensure the direction of machine to be moved.
The machine moving speed is limited when the platform is ascended.
Drive Selection Switch
Symbols of machine on the slope: Please operate it within low speed scope when it is inclined.
The Indicator is in Red
If the indicator is in red, please press and pull out the red emergency shutdown button to reset the
system.
If the lamp is still red, mark the machine and stop using it.