LGMG A14JE, Руководство по обслуживанию

Страница: 8 / 16

Maintenance Manual of Elevating Work Platform
3
1.1 Compliance
1) The operator can only perform routine
maintenance items as specified in this
manual.
2) Regular maintenance inspections should
be performed by qualified authorized
service technicians as required by the
manufacturer
Maintenance symbol legend
The following symbols appear in this manual to
indicate the relevant meaning in the operation
instructions. When one or more symbols appear
in front of the maintenance procedure, the
meanings expressed are as follows.
It indicates that a tool is required to perform this
procedure.
It indicates that a new part is required to perform
this procedure.
It indicates that this procedure should be
performed by the dealer.
1.2 Inspecting the Drive Hub
Oil Level
1) Inspect the oil level of the drive hubs every
250 h or quarterly. Improper oil level will
result in reduced performance. Continuous
use will result in damage to components.
2) Inspect oil level
Figure 1-1 Traveling slowdown
1. Oil filler 2. Viewing port

Drive the machine until one plug is located
at the horizontal position as shown as
shown in Figure 1-1.

Remove the viewing port plug at the
horizontal position, and inspect oil level.

Result: Oil level shall be flush with the
bottom of the viewing port.

If necessary, add oil at the oil filler until the
oil level is flush with the bottom of the
viewing port, select gear oil by referring to
Machine Specifications section.

Coat the plugs with pipe thread sealant and
install the plugs.

Repeat this step for every drive hub.
1.3 Inspecting the Hydraulic
Oil And Filter
1) Inspect hydraulic oil level every 8 h or every
day.
△
!
Caution: Perform this step when
the boom is in the retracted position.

Park the vehicle on the flat site. Fully retract
the boom.