background image

28

OPERATION

limescale, and other dirt. Add citric acid or another 

cleaning agent for more effective results.
• Press and hold 

Intensive

 for 3 seconds to 

activate.

Rinse

This cycle is a quick rinse only for dishes that will 

not be washed immediately. The cycle rinses dishes 

that have excess soil to soften dried on residue. 

Rinsing the dishes helps prevent odors in the 

appliance.
• Press and hold 

Eco

 for 3 seconds to activate.

NOTE

•  Do not use detergent with the this option.
•  This cycle does not have drying.

Express

This cycle will quickly clean lightly soiled dishes.
• Press and hold 

Turbo

 for 3 seconds to activate.

NOTE

•  This cycle does not have drying. Select the 

Extra 

Dry

 option or another cycle for better drying. 

Extra Dry

 will add to the overall cycle time.

•  Detergent tablets are not recommended for use 

of 

Express

 cycle. If the detergent tablets are 

used, it may cause detergent residue on dishes 

due to the relatively low rinse temperatures.

Options and Extra 

Functions

Select the desired cycle button and then select the 

options for that cycle. For more information, see 

the 

Cycle/Option Guide

 section.

Dual Zone

This option automatically sets the spray intensity to 

soft for the upper spray arm and strong for the 

lower spray arm. Place heavily soiled dishes like 

plates and bowls in the lower rack and lightly soiled 

dishes like cups and small plates in the upper rack 

to get the best results.

Half Load

This option washes intensively by selecting the 

upper or lower racks. For small loads, use just the 

upper or lower rack to save energy and time. By 
pressing the 

Half Load

 button, the settings 

f

 

(Upper), 

g

 (Lower) and the cancellation of the this 

option are available.

Energy Saver

This option saves energy by reducing the wash and 

rinse temperatures. Wash time is increased to 

maintain wash results. Do not use this cycle with 

heavily soiled dishes.

Steam

This option adds steam during the cycle to improve 

wash results.

High Temp

Raises the main wash or heating rinse temperature 

to improve cleaning.
•  A chime will sound to alert you of any residual 

temperatures inside the appliance. Wait for the 

appliance to completely cool down before 

opening the door.

Extra Dry

Select this option for better drying results. This 

option adds extra drying time to the cycle and 

raises the heating rinse temperature.
•  When the rinse aid is empty, this option is 

selected automatically.

Содержание XD3 25U Series

























































Отзывы: