11
Operation
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
1. Press
FUNCTION
to select the frequency (AM
or FM) you want.
2. Select a station you want by pressing
TUN.-/+
on the remote control or
TUNE.-/+
on the front
panel.
Tuning in automatically
- Press
TUN.-/+
or
TUNE.-/+
for more than
0.5 second. Scanning stops when the unit
tunes in a station.
Tuning in manually
- Press
TUN.-/+
or
TUNE.-/+
briefly and
repeatedly.
3. Press
PROGRAM/MEMO
. A preset number will
flash on display window.
4. Press
PRESET/FOLDER (
)
to select the
preset number you want.
5. Press
PROGRAM/MEMO
again.
The station is stored.
6. Repeat the steps from 1 (or 2) to 5 to store
other stations.
To delete all of the memorized stations
Press and hold
PROGRAM/MEMO
for two sec-
onds, “ERASE ALL” appears on display window
and then
PROGRAM/MEMO
again, the stations
are deleted.
For your reference
If all stations have already been entered, “FULL”
message will appear for a moment and then a
preset number will flash. To change the preset
number, follow the steps 4 - 5.
To recall presets
Press and hold
PRESET/FOLDER (
)
until
the desired preset number appears or press it
repeatedly.
Listening to the Radio
1. Press
FUNCTION
to select the frequency (AM
or FM) you want.
The last received station is tuned in.
2. Press
PRESET/FOLDER (
)
repeatedly
to select the preset station you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by pressing
VOLUME
(
)
on the remote control [or rotating the
VOLUME control knob
] repeatedly.
To listen to non-preset radio stations
Refer to the sections “Presetting the Radio
Stations” on the left.
To turn off the radio
Press
POWER (
1
1
/
]]
)
to turn the unit off or select
another function mode (CD, USB, AUX,
PORTABLE, TAPE).
For your reference
• If an FM program is noisy;
Press
ST./MONO
, then “STEREO” disappears
on display window. There will be no stereo
effect, but the reception will be improved. Press
ST./MONO
again to restore the stereo effect.
• To improve reception;
Reposition the supplied antennas.
PORTABLE Function
When you connect a portable music playing
device to the PORT. IN jack on this device by
using a 3.5mm mini stereo cable (not supplied),
you can hear the sound being outputted from the
portable device through the speaker.
1. Connect the PORT.IN jack on this device to a
headphone jack on another portable one by
using a cable.
2. Press
FUNCTION
repeatedly to select
PORTABLE function.
3. Start playing the connected portable device.
4. Adjust the volume by using
VOLUME
.
Note:
The “ 3.5mm mini stereo cable” is sold sepa-
rately.
/
/
/
/
Headphone or Line out
PORT.IN
Portable Device
