31
EN
Standby Power Consumption
Standby power consumption
0.5 W
Network standby power consumption
2.0 W
The period of time after which the
power management function, or
a similar function, switches the
equipment automatically into standby
and/or off mode and/or the condition
providing networked standby
20 min.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to
. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis
This feature is only available on models with the
c
or
d
logo.
Use this feature to help you diagnose and solve
problems with your appliance.
NOTE
•
For reasons not attributable to LGE’s
negligence, the service may not operate due to
external factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
•
The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
Using LG ThinQ to Diagnose
Issues
If you experience a problem with your Wi-Fi
equipped appliance, it can transmit troubleshooting
data to a smartphone using the
LG ThinQ
application.
•
Launch the
LG ThinQ
application and select the
Smart Diagnosis
feature in the menu. Follow
the instructions provided in the
LG ThinQ
application.
Using Audible Diagnosis to
Diagnose Issues
Follow the instructions below to use the audible
diagnosis method.
•
Launch the
LG ThinQ
application and select the
Smart Diagnosis
feature in the menu. Follow
the instructions for audible diagnosis provided in
the
LG ThinQ
application.
1
Press the
Power
button to turn on the
appliance.
•
Do not press any other buttons.
2
Place the mouthpiece of your smartphone close
to the
c
or
d
logo.
Max.
10 mm
3
Press and hold the
Temp.
button for 3 seconds
or longer while holding the smartphone
mouthpiece to the logo until the data transfer is
complete.
•
Keep the smartphone in place until the data
transfer has finished. Time remaining for data
transfer is displayed.
4
4 After the data transfer is complete, the
diagnosis will be displayed in the application.
NOTE
•
For best results, do not move the smartphone
while the tones are being transmitted.