LG WTS14BSL, Руководство по обслуживанию

Страница: 12 / 55

12
Amount of WATER LEVEL
Water Temperature
Using Water
• This machine detects the quantity of laundry automatically, then sets the WATER LEVEL and
proper amount of Detergent.
• When you select a wash program, the WATER LEVEL and amount of
Detergent (to be used) will be shown on the control panel.
• The following table shows the amount of water.
•
laundry even though the same WATER LEVEL is indicated on the control panel.
• The machine sets the appropriate temperature automatically according to the wash program .
• You can change the Water Temperature by pressing the WATER TEMP. button.
• The temperature of the water impacts the efi ectiveness of all laundry additives and therefore, the cleaning results. We
recommend temperatures of:
- HOT 49~60°C…(120-140 F)
White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C…(85-105 F) Most items
- COLD* 18~24°C…(65-75 F)
Only very bright colors with light soil.
• When washing in COLD water additional steps may be needed:
- Adjust Detergent amount and pre-dissolve Detergent in WARM water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
* Temperature below 18°C…(65 F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc. In addition,
Detergent manufactures and care labels define COLD water as 26~29°C…(80-85 F).
[Minimum water amount]
It depends on laundry load and washer model. Or manually you can pour a certain amount water into tub directly
to some height. That’s because if water level reaches to the some height sensed by washer itself, washer
automatically operates. In other words, it is needed to pour water to the point when washer starts operating.
Note
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or
for severe cases.
Note
The dispenser drawer contains 2 compartments:
• Liquid Fabric Softener
• Liquid or Powder Low-Sudsing, High-Efi ciency Detergent
The dispenser automatically dispenses additives at the proper time in the wash cycle.
1. Slowly open the dispenser drawer by pulling the drawer out until it stops.
2. After adding laundry products, slowly close the dispenser drawer. Closing the drawer
too quickly could result in early dispensing of additives.
• Avoid overfilling or splashing when adding laundry products to the dispenser. Doing so
could result in early dispensing of laundry products.
At the end of the cycle, you may see water in the compartments. This is part of the normal
operation of the washer.
NOTE : Do not use bleach in the dispenser drawer.
Using the Dispenser Drawer