LG WTP357B, Руководство пользователя

Страница: 17 / 40

17
EN
Installing the Drain Hose
•
The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1 Insert the band clamp onto the drain hose
elbow. Pliers may be required to open the
clamp so it can be fitted to the rubber end of
the hose.
Band clamp
2
With the hose leading up from the elbow,
firmly insert the elbow onto the drain outlet on
the back of Mini Washer.
3
Adjust the band clamp with pliers to keep the
hose securely in place to prevent leaking.
Band clamp
Using the Drain Hose Connector
1
Connect the drain hose of the front-loading
washing machine and the Mini Washer to
the drain connector.
2
Insert the included band clamps on to the
ends of the two drain hoses.
3
Push the drain hoses firmly onto the drain
connector.
Drain hose
connector
CAUTION
•
Adjust the band clamps to prevent the hoses
from coming loose or leaking. Failure to do
so could result in flooding. Use of the drain
connector helps avoid siphoning, odors, or
improper draining.
EN
Leveling the Appliance
If the floor is uneven, turn the adjustable feet
of the Mini Washer as required (Do not insert
pieces of wood etc. under the feet). Make
sure that all four feet are stable and resting on
the floor and then check that the appliance is
perfectly level (Use a spirit level).
•
Once the appliance is level, tighten the lock
nuts up towards the base of the appliance. All
lock nuts must be tightened.
Raise Lower
Lock nut
Tighten all 4
lock nuts securely
Diagonal Check
•
When pushing down on the edges of the
top plate diagonally, the appliance should
not move up and down at all (check both
directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the necessary foot or feet again.
WARNING
•
After stacking Main front-loading washing
machine on to the Mini Washer, use the
leveling feet on Mini Washer to level both. The
main front-loading washing machine´s leveling
feet should already be firmly snug against
the Mini Washer and the locknuts turned
counterclockwise to secure them.
NOTE
•
Timber or suspended type flooring will
contribute to excessive vibration and
unbalance.
Using Anti-Slip Sheets (some
models only)
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
1
Clean the floor to attach the anti-slip sheets.
•
Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side of the anti-slip
sheets on the floor.
•
It is most effective to install the anti-slip
sheets under the front feet. If it is difficult to
place the pads under the front feet, place
them under the back feet.
This side up
Adhesive side
4
Ensure the appliance is level.
•
Push or rock the top edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
•
You can obtain anti-slip sheets from an LG
Service Centre or a Hardware store.