manualshive.com logo in svg

LG WT-H756, Руководство пользователя, Страница: 9 / 32

Поделиться
Скачать
LG WT-H756 Скачать руководство пользователя страница 9

9

nstallation

Intr
oduction

I

Install the washing machine on a flat and firm surface.

• Install the washing machine on a level and firm surface.

• Keep the washing machine more than 10cm from the wall to prevent vibration noise during spinning.

• The base opening must not be obstructed by carpeting when the washing 

machine is installed on a carpeted floor.

• Wooden floors may need reinforcing to prevent the normal vibration which occurs with an unbalanced load.

Level the washing machine

❏ 

Check the level of the washing machine using a 

spirit level on the side of the washing cabinet

❏ 

You can check the level also by visually lining up the

washer with the fills, adjacent walls or cabinets.

❏ 

You can level the washer using the A.L spindle fitted to the cabinet.

• Screw the A.L SPINDLE legs up or down as required.

• Additional height adjustment plates are provided in the accessory bag. These fit under A.L SPINDLE if required

to allow for greater adjustment of the legs.

• When washing machine does not even out, turn A.L SPINDLE 

right or left to be level.

• Should the height adjustment exceed the maximum 

allowed by the A.L SPINDLE, place height 

adjustment plats provided under 

the legs as shown in the 

diagram.

10cm

• 

If the washer is installed on a uneven,weak or tilted floor causing excessive vibration, spin failure

or " 

UE

" error can happen to it.

It must be placed on a firm and level floor to prevent spin failure.

• 

If the appliance is supplied from a cord extension set or electrical portable outlet device the core

extension set or electrical portable outlet device should be positioned so it is not subject to

splashing or ingress of moisture.

CAUTION 

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which

powers only that appliance and has no additional outlets or branch circuits. Check the specification page of

this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any

of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if

its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the

cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical

or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular

attention to plugs, wall outlets, and the point where the cord exits the appliance. 

CAUTION 

A.L SPINCLE

UP

DOWN

1 plate used 2 plates used 3 plates used 4 plates used

Содержание WT-H756

































Отзывы:

Нет отзывов