manualshive.com logo in svg

LG WM3360H*CA, Руководство по обслуживанию, Страница: 14 / 63

Поделиться
Скачать
LG WM3360H*CA Скачать руководство пользователя страница 14

13

Option Button

• 

STEAM: 

Use the STEAM button to add steam to the cycle for the extra cleaning.

• 

PRE-WASH:

Use the PREWASH button to select to wash temporary before to start the course which you chosen.

• 

DELAY WASH:

Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle.

• 

COLDWASH

TM

: 

Use this function to wash without hot water and heating.

• 

EXTRA RINSE : 

This option will add an extra rinse cycle to the selected cycle.

• 

STAIN CARE : 

Select this option for heavily stained clothes, such as play clothes or work clothes.

• 

CHILD LOCK : 

Use this option to prevent unwanted use of the washer or to keep cycle settings from being 

changed while the washer is operating.

• 

FRESH CARE : 

Use this function when you are not able to unload your clothes, son after the wash cycle ends.

Wash/Rinse, Spin speed, Soil Level, Signal Button

•

Select a water temperature based on the type of load you are washing. 

•

To change the spin speed, press the Spin Speed button repeatedly to cycle through available options.

•

To change the soil level, press the Soil Level button repeatedly until the desired setting is on.

•

Press repeatedly to adjust the volume of the Beeper.

Содержание WM3360H*CA
































































Отзывы:

Нет отзывов