LG WM3360H*CA Скачать руководство пользователя страница 11

Страница: 11 / 63

7 TEST OPERATION

Preparation for
washing.

• Connect the power plug to the

outlet.

• Connect the inlet hoses.

Press the POWER button.

Press the START/PAUSE
button.

• Listen for a click to determine if the

door has locked.

Check the water heating
function.

• Press the WASH/RINSE button

and the present temperature will
be displayed.

• Check if the drum rotates

clockwise and counterclockwise.

Check the automatic reverse
rotation.

Check the water supply.

• Check if water is supplied through

the detergent dispenser.

Check the drain and spin
functions.

• Power off and the power on.
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain functions.

• Listen for a click to determine if the

door is unlocking.

Press the START/PAUSE
button.

Water removal

• If SERVICE is needed during

check, remove the remaining
water by pulling out the hose cap.

Содержание WM3360H*CA
































































Результаты поиска

Содержание WM3360H*CA

Отзывы:

LG WM3360H*CA, Руководство по обслуживанию, Страница: 11 / 63

Результаты поиска

Содержание WM3360H*CA

Отзывы: