INSTALLATION INSTRUCTIONS
6
■
Installation clearances
The location must be large enough to fully open
the washer door.
■
Washer dimensions
• Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
■
Minimum installation spacing for
recessed area installation.
The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required for wall,
door and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of
the washer is recommended to reduce noise
transfer.
Companion appliance spacing should also be
considered.
■
Level floor
• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed
floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or weakly
supported structure.
NOTE: A firm, solid floor is even more critical to a
front-loading washer than to a top-loader. If
your floor is wood and/or frame construction,
you may need to reinforce it. Front-loaders use
substantially faster spin speeds than top-
loaders, causing greater vibration. If the floor
is not solid, your washer will vibrate. You will
hear and feel the vibration throughout your
house.
■
Power outlet
•
Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more
than one appliance.
•
Time-delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility and obligation
of the customer to have a proper outlet
installed by a qualified electrician.
[Front view]
[Side view]
Содержание WM2377C series
