LG WF-T857 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 59

LG WF-T857 Скачать руководство пользователя страница 20

20

3-5. OTHERS FUNCTIONS

1) SOAK Wash

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEAN, SILENT or FAVORITE program.

Press the

AUTO OFF (POWER)

button to turn power on.

1

Press the

PROGRAM

button to select the washing program.

• SOAK will not work in WOOL and ECONOMY, TIUB CLEAN,

DELICATE Program.

• Keep pressing the WASH button until the

light turns on “Soak” and ”Wash”
simultaneously as next image.

• SOAK program only works when socking

time is 40, 50 or 60 minutes.

2

Press the WASH button, to select SOAK program.

3

Add the Detergent.

• The appropriate quantity of Detergent marked next to the

WATER LEVEL

of WATER-DETERGENT.

4

Add the laundry and press the

START/PAUSE

button.

• The

WATER LEVEL

and the amount of Detergent to be used will

be shown and water will be supplied.

5

Close the lid.

Finish

• Water will be supplied for 2 minutes after the start of the wash

to supplement the absorbed water by the laundry.

6

When the wash program ends, the buzzer will ring for 10seconds
before the Power goes off automatically.

«
...
18
19
20
21
22
...
»

Содержание WF-T857




























































Отзывы:

Нет отзывов