LG WF-T857, Руководство по обслуживанию, Страница: 16 / 59

16
3-3. FUNCTION OF EACH BUTTON
2 hr
1 hr
30 min.
(Tubdry)
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
TIME LEFT, DELAY START
(RESER V ATION), ALARM INDICATION
- During operation, the remaining time
is indicated.
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
-When an error occurs, an error
message appears to indicate the abnormality.
For example, indicates that the lid is open.
DELAY START (RESERVATION) BUTTON
pushed.
the button is pushed 3 4 5
...11 12 14 16 ...46
48 3 HOUR.
switch off.
(refer to page 24)
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
WATER LEVEL is automatically selected for FUZZY
(normal) program.
The following settings are indicated as the button is pushed
LARGE LARGE . EX-LARGE EX-LARGE
SMALL SMALL MEDIUM MEDIUM
MEDIUM LARGE LARGE
AIR DRY
This button is used for air-drying of your
laundry.
Air dry selections light up in sequence as
follows.
30min. 1hr 2hr 30min. as the
button is pushed.
WASH. RINSE. SPIN BUTTON
Use when wash, rinse, spin
time need to be adjusted.
The time increases when the
button is pressed .
If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
When the button is pressed
during washing, the remaining
time is displayed.
WATER TEMPERATURE
BUTTON (OPTION)
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT COLD
respectively.
Default setting is COLD.