Function of each Button
14
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8min-
utes at maximum and decreased by 4 minutes at maximum.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The steam option cannot be used with all cycles.
* Steam may not be clearly visible during the steam cycles.
This is normal. Too much steam could damage clothing.
Display laundry progress
Time Delay (Reservation)
button
Water wave button
Water Level button
(display detergent amount)
Display remaining time, reservation time, and alarm for trouble
A
• Laundry progress is indicated
here.
• Process to be done will have
light on. Process in progress
will blink and process already
done will have light off.
• Use for laundry
reservation.
• To cancel, turn power
off.
(refer to page 26)
Steam button
• Use for steam.
• Steam can be selected
under Normal,
Whitening, Favorite
course.
• Steam is automatically
selected under Allergy
care course.
• To control water wave.
• Initially set at “medium”
but will not be indicated.
To control Strong wave
power, press Strong
wave. (all course except
Allergy Care, Delicates
and Tub Clean can
adjust wave.)
• Use to adjust Water Level.
• It can be changed during
operation.
• Add detergent as much as
indicated amount next to
Water Level.
• Detergent is based on
condensed detergent.
Tub Dry Button
• Use this when you
want to dry the empty
tub after a wash.
Buzzer Button
• Pressing the
button allows
OFF ON.
• During operation this indicates time to finish of laundry.
ex) indicates remaining time of laundry, rinse, spin
dry during operation/pause.
• If there is a trouble, it blinks with buzzer sound and indicates
the source of trouble. It will work normally after
troubleshooting.
