LG WF-CL700, Руководство пользователя

Страница: 15 / 32

W
ashing Programs
15
Close the lid Finish Caution & Note
WATER
LEVEL
The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and
the amount of detergent to
be used will be shown and
water will be supplied. Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed. When the wash
program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.
If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level can
be set low.
Changes to water temperature (hot/cold) and
wash level are possible during operation.
(refer to page 12)
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
3 5 6
7
8
7
7
6
6
6
7
4
4
5
4
When setting the water level manually, do not
set to Medium to prevent damage to laundry.
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.
Speedy Soak Wash cannot be selected for the
Wool Wash program.
If wool wash is selected, Gentle Spin will be set
automatically.