31
ow to use washer
H
• If the washer encounters a fault during
operation, the associated fault will be
displayed.
“ ” : Water pressure sensing error
“ ” : Problem of overfilling water
“ ” : Door is not closed
“ ” : Over load in motor
“ ” : Water inlet trouble
“ ” : Drainage trouble
“ ” : Unbalanced load
“ ” : Water temperature trouble
“ ” : Dry heater or thermostat trouble.
If these error letters are displayed, please refer to
the troubleshooting page39 and follow the guide.
• When Child lock is selected, the “ ” is
displayed
• When time delay is selected, it shows the
remaining time before the finish of the
selected program.
• When washing cycle is completed,
“ ” is displayed on the “
Multi display
”.
• During washing cycle, the remaining washing
time is displayed.
• Recommended program by manufacturer.
- Refresh
: around 25 minutes
- Allergy Care
: around 1 hour and 42 minutes
- Cotton
: around 2 hours and 43 minutes
- Heavy Duty
: around 1 hour and 59 minutes
- Sanitary
: around 1 hour and 59 minutes
- Speed Wash
: around 49 minutes
- Rinse+Spin
: around 18 minutes
- Duvet
: around 1 hour and 30 minutes
- Wool
: around 52 minutes
- Cold Wash
: around 1 hour and 32 minutes
- Dark Wash
: around 1 hour and 7 minutes
- Sports Wear
: around 1 hour and 12 minutes
• The washing time may vary by the amount
of laundry, water pressure, water
temperature and other washing conditions.
• If an unbalanced load is detected or if the
suds removing program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
Display
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnose display
Содержание WD-SR1310M
Страница 41: ......