LG WD-SR1310M, Руководство пользователя

Страница: 29 / 41

29
ow to use washer H
Shoes Dry function
Locate the shoes in the correct location and dry
them. (1 Pair)
• Insert the shoes so that the nose of the
shoes faces the inner side.
Separate the insoles
and strings to dry them.
Set the shoes in upright
position and shake off
the water collected inside
before drying them.
1. Press the Power button
• Open the bottom drawer and insert the
shoes in the designated location.
2. Shoes Dry
• Press and select the Shoes Dry button.
- Press the Shoes Dry button to set the
drying time you want.
- Initial setup time is 3 hours.
(Minimum of 2 hours to maximum of 4
hours can be set for 1 cycle.)
- Close the drawer.
3. Press the Start/Pause button
• Shoes Dry course will start.
• Do not use the Shoes Dry function for long
ankle boots because the Dry performance may
not be high.
• Never use this function to dry pets, such as
dogs, food, grains or vegetables.
• It is more effective to use the Shoes Dry
function after removing the moisture by tilting
the shoes upright after washing them.
• If the moisture cannot be fully removed, it is
good to keep the shoes in the upright position
(for 5-10 minutes) or shake the moisture off to
partially remove the moisture before drying
them.
• For shoes of which the insoles and strings can
be removed, it is effective to do so before
drying them.
• It is most effective to put the shoes in the
designated location within the drawer.
• When drying the shoes, ventilate the room as
the shoes may generate odor.
• When drying thick or moist shoes, they may
not dry very well. In this case add more time
after the drying is completed, if necessary.
Use this function when you want to dry wet
shoes.
CAUTION
• Do not add any detergent or fabric softener.
• Insert only one pair of shoes in the
designated location.
!
CAUTION
• How to dry the shoes well.
!
NOTE