LG WD(M)-10160(5)F, Руководство по обслуживанию

Страница: 26 / 36

24
1
10
1 2 3 4 5 6 7 8 9 10
5
YES
YES
YES
NO
NO
NO
NO
YES
3 4 1 2
SPIN TROUBLE
Normal.
Reconnect or repair it.
Replace the motor
assembly.
Check the sensor
(Pressure) or hose
(Sensor).
If the problem is on the
sensor or the hose, replace
the sensor or the hose.
Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be
checked by pressing the [Option] and [Spin] buttons at
the same time on the program.
Press Power button with both Temp. and Option
buttons pressed after power off. Press Start/Pause
button 2 times. Does the drum rotate at low spin
speed?
Is it disconnected or badly contacted?
Red : 3pin ( ), Natural : 4pin ( ), White : 2pin( ),
Natural : 3pin( )
Check the motor connector, Is the resistance between
the terminal in figure the same as below?
Resistance between terminals
~ : 0.5~1.0
~ : 1.5~2.5
Be sure to unplug the machine before measuring.
MOTOR TERMINAL
Replace the PWB assembly.