background image

3

Part 1

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

WARNING

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, personal injury, or loss of life.

IMPORTANT SAFETY INSTRUCTIONS

• Read all instructions before using the washer.

• Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry
cleaning solvents, or other flammable or explosive
substances, as they give off vapors that could ignite or
explode.

• Do not add gasoline, dry cleaning solvents, or other

flammable or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE.
If the hot water system has not been used for such a
period, before using the washing machine, turn on all
hot water faucets and let the water flow from each for
several minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not smoke
or use an open flame during this time.

• Do not allow children to play on or in the washer. 

Close supervision of children is necessary when the
washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children from
hiding inside.

• Do not install or store the washer where it will be

exposed to the weather.

• Do not tamper with the controls.

• Do not repair or replace any part of the washer or

attempt any servicing unless specifically
recommended in the user-maintenance instructions or
published user-repair instructions that you understand
and have the skills to carry out.

• See 

Installation Instructions

for grounding

requirements.

• ALWAYS follow the fabric care instructions supplied by

the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.

• Do not use fabric softeners or products to eliminate

static unless recommended by the manufacturer of the
fabric softener or product.

WARNING

:

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord
having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with all local codes and ordinances.

• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.

GROUNDING INSTRUCTIONS

Your safety and the safety of others are very important.

WARNING

:

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Consult a
qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. 
Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed
by a qualified electrician.

!

!

!

DANGER

:

You can be killed or seriously injured if you don’t follow instructions.

!

WARNING

:

You can be killed or seriously injured if you don’t follow instructions.

!

!

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.
These words mean:

SAVE THESE INSTRUCTIONS        

Содержание WD-10467BD





























Отзывы: