1 8
Part 5
PROGRAMMING MODE -
Setup Mode
77
How to change the water level
You can change the water level by selecting two options.
1. LO indicate water level 23.8 [KHz]
2. HI indicate water level 23.7 [KHz]
Entering set up mode.
You will see LqC1
Button
Display
• This function is only controlled in machine.
(It is not applied in setup card.)
Note
Press the
MEDICAL 90
button.
Press the
NORMAL 75
or the
NORMAL 60
button until appears in the display.
Press the
START
button.
Press the
NORMAL 75
or the
NORMAL 60
button until appears in the display.
Press the
START
button.
Press the
NORMAL 75
or the
NORMAL 60
button and then select
Press the
NORMAL 75(+)
or the
NORMAL 60(-)
button to
select value of PIPo. (0~4)
Press the
START
button.
The machine sets up the value of PIPo, then advances to the
next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Noncoin type – Press MEDICAL 90 button until ready
mode appears in the display.
One or the other will
display.
or
23.8 [KHz]
23.7 [KHz]
