1
Slide the air conditioner into the cabinet.
Reinstall the 2 screws removed earlier
on each side of the cabinet.
2
Stuff the foam around the unit to prevent air
and insects from getting into the room.
3
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown. (for some models)
CAUTION
●
5
Lift the inlet grill and secure the front grille
with a screw. Lower the inlet grille into
place.
4
Attach the front grille assembly to the
cabinet by inserting the grille tabs into the
slots on the front of the cabinet. Push the
grille in until it snaps into place.
Installations of the unit into
the Cabinet
Power Cord
Screw
Screw
The Foam
The power cord must be connected to an
independent circuit. The green wire must
be grounded.
When you detach the front
grille from the cabinet, push
the grille to your right side
and pull it toward you.
11 EN
INSTALLATION
Drain Pipe
In humid weather, excess water may cause the
base pan to overflow. To drain the water, remove
the drain cap and secure the drain pipe to the
rear hole of the base pan.
Press the drain pipe into the hole by pushing
down and away from the fins to avoid injury.
CAUTION
●
Be careful when inserting the drain pipe.
Push away from the sharp fin area to avoid
slipping injuring yourself.
Hang
Drain Cap
Push
Drain Pipe
(Around the unit)
